Laser Perforating Machine on sales
Description:
HANS*GS-D400P laser perforating machine selects Germany SIEMENS servo system to control the form
feeding system, due to SIEMENS servo system with strong calculation ability, rapid speed, high control precision, it has interior roll diameter automatic calculation function, and can ensure that the speed of form feeding is constant and the surface is kept neat.
Specification:
General performance and parameters of HANS*GS-D400P perforating machine
Laser generator
HANS*GS-D400P laser perforating machine equips OEM40iX totally metal enclosed CO2 laser generator of German ROFIN-SINAR company, and OEM40iX laser generator adopts the latest power feedback technology and the power output of closed-loop control laser generator, its power output can be adjusted continuously by the feedback signals of sampling power, in order that the power output instability would be controlled within ±2% and the long-running beam pattern would keep stable, the continuous running time without fault would reach over 10000 hours, besides, the beam quality is very good, and the function is reliable, so the overall lifetime is more than 10 years.
Optical splitting system
1. This laser perforating machine selects the whole piece stainless steel panel, and after the panel is milled, bored and ground precisely, it can be assembled with finishing welded steel frame, and the precise finishing processing can ensure the installation precision of all the mechanical components. All the pressure instruments, adjusting switch and optical shutter are arrayed in the panel in order to facilitate operation and warning.
2. HANS*GS-D400P laser perforating machine equips eight focusing optical heads, which are fixed the respective mechanical skid plateform, and the mechanical skid plateform is assembled in the host panel, while the dimensional mechanical skid plateform can adjust the longitudinal pitch of perforating and focus precisely, and you can set the value of holes pitch directly on the touch screen.
3. Each optical head is composed of 4 lenses, all the lenses are from American II-VI company.
Adopting the totally sealed optical circuits, it can avoid the contamination of external environment to the optical circuits lenses. The piping of dedusting system is assembled in the front of the puncher, in order to avoid the contamination of the box interior and optical circuits.
Application:
This set of equipment can realize ventilation and tar reducing through perforating tipping paper of cigarette filter tip in production line and to reduce the harm of smoking to human body.
Description:
HANS*GS-D400P laser perforating machine selects Germany SIEMENS servo system to control the form
feeding system, due to SIEMENS servo system with strong calculation ability, rapid speed, high control precision, it has interior roll diameter automatic calculation function, and can ensure that the speed of form feeding is constant and the surface is kept neat.
Specification:
General performance and parameters of HANS*GS-D400P perforating machine
Laser power | 400W |
PLC control type | closed-loop |
Controller | Germany SIEMENS servo system |
Form feeding control | Biaxial linkage control |
Indicator setting method | Independent, simple |
Spectrophotometric method | by polygon prism |
Permeability range | 100-2000cu |
Permeability instability | Less than 5% (relative error) |
Maximum perforating speed | 1920 thousand /min |
Maximum perforating density | 4pcs/mm |
Minimum perforating density | 1pc/10mm |
Hole diameter range | 0.05-0.25 mm |
Hole shape | oval or round |
Hole quality | neat, without deckle edge or coking |
Maximum feeding speed | 650m/ min |
Perforating row number | 2-8 rows |
Acceleration time (0-300m/min) | 3sec. |
Total system power | 35KW |
Width range of processing tipping paper tray | 40-80mm |
Maximum processing winding tray diameter | 520mm |
After perforate tipping paper tray, the front-end non-porous paper length and tail length of waste paper(feeding speed is 300m/min) | 15M(front),2M(tail) |
Environment requirments | 20-30ºC Constant temperature |
Machine lifetime | 10 years |
Chilling water hardness | 250mg/L |
Gas consumption of laser head | 2.8L/min |
Temperature of cooling machine, adjusting range | 10-30ºC |
About the cooling machine temperature and adjusting precision, is there monitor display ? | Yes, the adjusting precision is ±0.1ºC. |
Chilling water flow speed | 25L/MIN |
Water storage capacity of chiller | 0.3M |
Laser generator
HANS*GS-D400P laser perforating machine equips OEM40iX totally metal enclosed CO2 laser generator of German ROFIN-SINAR company, and OEM40iX laser generator adopts the latest power feedback technology and the power output of closed-loop control laser generator, its power output can be adjusted continuously by the feedback signals of sampling power, in order that the power output instability would be controlled within ±2% and the long-running beam pattern would keep stable, the continuous running time without fault would reach over 10000 hours, besides, the beam quality is very good, and the function is reliable, so the overall lifetime is more than 10 years.
Optical splitting system
1. This laser perforating machine selects the whole piece stainless steel panel, and after the panel is milled, bored and ground precisely, it can be assembled with finishing welded steel frame, and the precise finishing processing can ensure the installation precision of all the mechanical components. All the pressure instruments, adjusting switch and optical shutter are arrayed in the panel in order to facilitate operation and warning.
2. HANS*GS-D400P laser perforating machine equips eight focusing optical heads, which are fixed the respective mechanical skid plateform, and the mechanical skid plateform is assembled in the host panel, while the dimensional mechanical skid plateform can adjust the longitudinal pitch of perforating and focus precisely, and you can set the value of holes pitch directly on the touch screen.
3. Each optical head is composed of 4 lenses, all the lenses are from American II-VI company.
Adopting the totally sealed optical circuits, it can avoid the contamination of external environment to the optical circuits lenses. The piping of dedusting system is assembled in the front of the puncher, in order to avoid the contamination of the box interior and optical circuits.
Application:
This set of equipment can realize ventilation and tar reducing through perforating tipping paper of cigarette filter tip in production line and to reduce the harm of smoking to human body.